Inverter
Inverter
Features
- Wide Mains Input Voltage Range 100V - 290V
- Controlled Output Voltage
- Suitable for Mains Low Voltage Operation, 8 - 10 AMP Charging at 120V Mains Input
- FCBC technology for battery charging which automatically sense battery condition & adjust the charging current accordingly
- Soft Touch ON/OFF, Mode Selection & Charging Selection Switch
- Smart In-built Protections - Overload, Short Circuit, AC Back Feed, Battery Low, Battery over Charge, Mains Overload through Resettable Switch, Over Temperature etc.
Technical specifications
| Description | 12V 950VA | 24V 1650VA | 48V 3000VA |
| Output Voltage at No Load | 235V ± 15V AC | 235V ± 15V AC | 235V ± 15V AC |
| Output Frequency | 50Hz ± 1Hz | 50Hz ± 1Hz | 50Hz ± 1Hz |
| Output Wave Form | Quasi Wave | Quasi Wave | Quasi Wave |
| Nominal Battery Voltage | 12V DC | 24V DC | 48V DC |
| Battery Low Cut Off | 10.5V ± 0.2V DC | 21.0V ± 0.4V DC | 42.0V ± 0.4V DC |
Charging Mode
| Model | 12V 950VA | 24V 1650VA | 48V 3000VA |
| Maximum Charging Current (NC) | 09.5Amp ± 1.5Amp | 17Amp ± 1.5Amp | 34Amp ± 1.5Amp |
| Maximum Charging Current (HC) | 13Amp ± 1.5Amp | 14Amp ± 1.5Amp | 15Amp ± 1.5Amp |
| Boost Charging Voltage | 14.4V ± 0.2V DC | 28.8V ± 0.4V DC | 57.6V ± 0.8V DC |
| Trickle Charging Voltage | 13.7V ± 0.2V DC | 27.4V ± 0.4V DC | 54.8V ± 0.8V DC |
| Charging Current at 120V Mains Input | 8-10Amp Charging* | ||
| Changeover Time Mains to Back-up (@ UPS Mode) | ≤ 10msec | ||
| Changeover Time Back-up to Mains (@ UPS Mode) | ≤ 10msec | ||
| Changeover Time Mains to Back-up (@ Normal Mode) | ≤ 40msec | ||
| Changeover Time Back-up to Mains (@ Normal Mode) | ≤ 10msec | ||
| Input Voltage Range (@ Normal Mode) | ≤ 100V - 290V AC | ||