Single /Three Phase ON-LINE UPS
Single /Three Phase ON-LINE UPS
Technical specifications
Model | TL500 / TL650/TL1K/TL1.5K/TL2K/TL3K |
INPUT | |
Input Voltage | Single Phase, 230V AC |
Input Volt. Range | 160v-280v ac (Wider Range 120V-290V also availble) |
Input Freq. | 50hz +/- 10% |
DG set compatibbility | Suitable for both Mains Supply /DG Set Supply |
OUTPUT | |
Voltage v | Output Window 195V -250V (Automatic AVR function) |
Frequency regulation | Synchronised to mains Frequency |
Inverter Mode | |
Output Volt. | Single Phase, 220V/230V AC |
Voltage Regulation | 230V + 3% |
Frequency regulation | 50 Hz + 0.5 |
Waveform | Pure Sine Wave |
THD Volt | Less than 5% |
Transfer Time | Less than 5 milli Seconds (Typical) |
BATTERY | |
DC Bus Voltage | 12V/24V/48V DC |
Re-charge Time | 8 hours for 90% charging |
PROTECTION | |
Overload | 110% for 2min, |
Short circuit | Electronics protection in Inverter Mode, Fuse /MCB in Mains Mode |
Battery Low | Protection Available |
visual indicators /alarms | |
Indication (LED) | Mains ON , Battery Mode , Battery Low |
Overload , Battery Charging , Battery Level | |
Alarm | Battery Low, Overload, Mians Fail, Fault |
GENERAL | |
Audible Noise | Less Than 45dB |
Operating Temp Ranfe | 0 degree C- 45degree C |
Relative Humidity | 0-95% NON- CONDENSING |
Cold Start | Available |
Communication Port with Siftware Interface | |
Communication Interface | R232/DB9 provided- Optional |
* These specifications are for a Standard Product. Customized specifications can be offered against specific requirements.